What should we pay attention to in autumn and winter color wrap film construction?

What should we pay attention to in autumn and winter Color Wrap Film construction?

The low temperature difference between autumn and winter is large, and the construction of film requires high construction temperature. Usually, we say that the construction temperature refers to the temperature of the inner chamber and the temperature of the film coating. In view of the construction problems easily caused by low temperature, we generally do this:

1. Work in the air conditioning or heating construction room (it is recommended to turn on the heating for 2-3 hours before construction, and the temperature is optimal to 22 degrees);

2. The construction vehicle should be placed in the construction room in advance, and the surface temperature of the car body will take some time to reach the temperature required for the Car Wrapping Vinyl (22 degrees is the best);

3, in order to ensure that the temperature meets the requirements, it is best to measure the temperature of the construction room and the temperature of the construction car body before construction;

4, if the construction process will still encounter the film is relatively hard or brittle, please reduce the number of repeated lift, as far as possible to complete the construction professional; If you need to lift it, please use the baking gun to heat the position that needs to be lifted, and heat the film in a large area, so that after the film softens, it is slowly lifted, which can reduce the possibility of easy rupture when lifted.

5, if the film is broken, need to replace the new film construction, try not to try to stretch the rupture position.

6, the color change film becomes hard and brittle in winter, and it needs to be baked with a hot air gun to have tensile, and in the process of cutting and tearing the car vinyl, it is best to tear the film at an outward Angle of 45 degrees to avoid tearing the color change.