Car Color Wrap Film Tips

The Car Color Wrap Film is a high-density vinyl film, which can be attached to the surface of the body on the basis of the original paint, not only will not harm the original paint, but also play a protective role, and the car wraping film can be torn off to restore the original color. This kind of car body color change film can not only be covered by a single color, but also can be two-color, multi-color splicing, and even can be painted to make a variety of patterns, the important thing is that the Color Wrap Film can isolate the car paint from the air, effectively prevent the car paint acid and alkali corrosion and oxidation, equivalent to adding a protective layer to the car.

It takes about 2 days to apply a full load of membrane. Generally speaking, the maintenance time of the color changing film is 3-8 years, if the paste is not good and there are gaps, the film will tilt the edge in a very short time, which means that the previous work is wasted, the sales staff said that the film price is different, the quality is also wide, and the poor quality of the color changing film will cause damage to the original car paint because of the inferior glue. In addition, a good film must also have a good technical master paste. If the film technology is not strong, even if the film is good, there will be hidden dangers such as warping and bubbles in the future.

After the completion of the color change film, it needs to be carefully cared for in the short term, for example, cleaning the vehicle needs to be carried out after a week, and the high-pressure water gun cannot be used to directly spray the joint between the film and the car paint; Do not use objects such as adhesives to attach to the film surface, and do not use brushes, abrasives, or sponges with abrasives to clean the film surface.

The car maintenance after the film is also exquisite, for example, can not use the car wax containing abrasive, otherwise it will directly damage the car vinyl film, and can not use the polishing machine to polish the film, if the car is damaged by rubbing the film, the repair of the film is more troublesome, it needs a professional technician to tear off the original film and then paste, even if the same color will have color difference.

At the beginning of the construction, the adhesion of the film is low, do not touch, especially the edge part. There is a possibility of subsequent bubbles or blisters, which is a normal phenomenon, and may disappear naturally after 10 to 20 days. You can also return to the store for treatment or consultation in order to deal with it in time.


Car washing should be carried out after the film is dried (about three days later), do not use the water gun to spray the seam between the film and the car paint.

Avoid using items with adhesives and the like to stick to the film surface.

Avoid using cleaning tools that cause damage to the membrane surface. Do not use brushes, abrasives, or sponges with abrasives to clean the film surface.

Wipe the surface of the film with clean water using a soft wet cloth. If cleaning agent is required, use a neutral cleaning agent.

If it is necessary to remove the film, it must be operated by a professional technician.

There are individual small bubbles within a month after construction, which is a normal phenomenon. With the increase of use time, the smooth surface can be naturally restored. The temperature of the sun will make the film stick to the paint more firmly, and the edges will not open. After the construction, we require the best exposure in the sun for 2 hours, which is why.